Overview

This sleeve puffs at the sleeve cap and at the hem. This free puffed sleeve pattern is based on the standard sleeve sloper.

The sleeve is slashed in five positions and the spread value variables are added at each slash. For example a spread of 1" / 25mm would add 5" / 125mm additional fullness.

The Spread Value variable is applied at the sleeve hem. The Spread Value 2 variable is applied at the sleeve cap (shoulder). The value applied at the hem must be the same or greater than the value added at the cap or the draft will fail.

If a Sleeve Length is not specified, it will be drafted to fall midway on the upper arm.

The pattern defaults to a fold up hem for elastic. To use an elastic cuff instead, set the Hem Depth to 0.

Specifications

Time Period:
Modern
Difficulty:
Easy
Category:
Child

• Basic measurements • Detailed measurements

Required Measurements

  • Armhole Length
  • Height
  • Overarm Length
  • Wrist