This is a free very traditional flat collar with a pointed collar tip pattern. The collar is designed to meet at center front.
It has a 1" / 25mm shoulder overlap, which equates to approximately 1/4" / 6mm rise. The width of the collar is 3" / 76mm by default. The collar center front point is lowered 3/8" / 9.5mm from the bodice center front point.
The pattern includes a dashed line for cutting the under-collar, which is 1/8" / 3mm narrower than the collar at the center back and tapering to 0.
Compatible front and back bodice patterns are required for this draft. If they are not included in the basket, a standard sloper will be drafted for the necessary data and then discarded.
• Basic measurements • Detailed measurements
- Across Back
- Armhole Length
- Center Back to Waist
- Chest / Bust
- Waist to Hip