This is a wide flat collar with a pointed collar tip. The tip is extended 1 1/8" / 30mm more than the collar width exaggerating the point. The collar is designed to meet at center front.
It has a 3/4" / 19mm shoulder overlap, which equates to approximately 1/8" / 3mm rise. The width of the collar is 3.5" / 89mm by default. The collar center front point is lowered 3/8" / 9.5mm from the bodice center front point.
The pattern includes a dashed line for cutting the under-collar, which is 1/8" / 3mm narrower than the collar at the center back and tapering to 0.
Compatible front and back bodice patterns are required for this draft. If they are not included in the basket, a standard sloper will be drafted for the necessary data and then discarded.
• Basic measurements • Detailed measurements
- Across Back
- Armhole Length
- Center Back to Waist
- Chest / Bust
- Waist to Hip