This is a simple back bodice sloper with a fitted waist dart. If the shoulder length exceeds 1/4" / 6mm in excess, then a shoulder dart will be added. 

If the bust measurement exceeds the waist measurement, the difference is divided with half going into the waist dart and the other half taken in at the side point.

This is intended for use as a fitting sloper, so there are no ease amounts added by default. The default seam allowance is generous.

This is drafted to be sewn with a center back seam for fitting purposes.


Adult XY

Required Measurements

  • Blade Apex Width Back
  • Blade Height Back
  • Bust / Chest Width Back
  • Center Length Back
  • Full Length Back
  • Height
  • Mid-Armhole Height Back
  • Mid-Armhole Width Back
  • Neck Back
  • Shoulder Across Back
  • Shoulder Length
  • Shoulder Slope Back
  • Shoulder to Mid-Armhole Back
  • Side Length
  • Waist Width Back