Overview

This is a bodice front sloper that fits to the hips and is based on the #22 front bodice shoulder/waist dart. This is very form fitting and should follow the lines of the body well. The bust dart take-up is split in half and moved to the shoulder. The waist dart extends to the hip further shaping the pattern.

This is intended for use as a fitting sloper, so there are no ease amounts added by default. The default seam allowance is generous.

This is drafted to be sewn with a center front seam for fitting purposes. The two lines down the side of the body should be softened into a curve. After adjustments, make sure the length still matches the back bodice side length.

Specifications

Difficulty:
Average
Category:
Adult X

Required Measurements

  • Bust / Chest Height Front
  • Bust / Chest Width Front
  • Bust Apex Width Front
  • Center Length Front
  • Full Length Front
  • Height
  • Hip Depth Front
  • Hip Depth Side
  • Hip Width Front
  • Mid-Armhole Height Front
  • Mid-Armhole Width Front
  • Neck Front
  • Shoulder Across Front
  • Shoulder Length
  • Shoulder Slope Front
  • Shoulder to Mid-Armhole Front
  • Side Length
  • Waist Width Front