Please Login to Continue

Overview

This is a bodice front sloper that fits to the hips. The pattern is split on the princess line, which runs from the mid-neck point to the bust apex to the waist and ending at the hip. These points follow the darts of the #18 torso sloper and are based on that pattern.

This is intended for use as a fitting sloper, so there are no ease amounts added by default. The default seam allowance is generous.

This is drafted to be sewn with a center front seam for fitting purposes. The two lines down the side of the body should be softened into a curve. After adjustments, make sure the length still matches the back bodice side length. You should also soften the points on the princess line in the middle to create a gentle curve.

• Bust / Chest Height Front
• Bust / Chest Width Front
• Bust Apex Width Front
• Center Length Front
• Full Length Front
• Height
• Hip Depth Front
• Hip Depth Side
• Hip Width Front
• Mid-Armhole Height Front
• Mid-Armhole Width Front
• Neck Front
• Shoulder Across Front
• Shoulder Length
• Shoulder Slope Front
• Shoulder to Mid-Armhole Front
• Side Length
• Waist Width Front