This sleeve puffs at the sleeve end. This free puffed sleeve pattern is based on the standard sleeve sloper. All the fullness is evenly distributed at the sleeve end (hem).

The sleeve is slashed in five positions and the Spread Value variable is added at each slash. For example a spread of 1" / 25mm would add 5" / 125mm additional fullness at the sleeve end.

If a Sleeve Length is not specified, it will be drafted to a length of 2" / 76mm plus 1/2 Armhole Length, which is the minimum length. This includes a minimum 1" / 25mm hem. (The final sleeve length will be shorter than the specified Sleeve Length due to the spreading process during the draft.)

Sewing - The sleeve hem edge should be finished or turned at the seam allowance line and then turned up at the hem fold line. Elastic should be inserted into the casing.


Time Period:
Adult XY

• Basic measurements • Detailed measurements

Required Measurements

  • Armhole Length
  • Height
  • Overarm Length
  • Wrist